CFFPM - U-1001C ENAMEL CATALYST

  • MSDS: CFFPM
  • Manufacturer: STERLING LACQUER MFG CO
  • Product Name: U-1001C ENAMEL CATALYST
  • National Stock Number: 8010-00F053616
Product Identification

Product ID:U-1001C ENAMEL CATALYST
MSDS Date:09/20/1995
FSC:8010
NIIN:00F053616
MSDS Number: CFFPM

Responsible Party
STERLING LACQUER MFG CO
3150 BRANNON AVE
ST LOUIS, MO 63139-1422
US

Emergency Phone: 314-776-4450

Info Phone: 314-776-4450

Preparer: P D MOORE

Cage: 60003

Contractor
STERLING LACQUER MFG CO
ST. LOUIS, MO 63139-1422 US

Telephone: 314-776-4450

Cage: 60003

Ingredients

ALIPHATIC POLYISOCYANATE, HEXAMETHYLENE DIISOCYANATE

CAS: 28182-81-2

RTECS: NQ9170000

Fraction By Weight: 40%


ACETIC ACID, ETHYL ESTER, ETHYL ACETATE *97-1*

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 25%

OSHA PEL 1400 MG/CUM

ACGIH TLV: 1400 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


BUTYL ACETATE (N-BUTYL ACETATE) *97-1*

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: <5%

OSHA PEL 710 MG/CUM

ACGIH TLV: 713 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: 20%


XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *97-1*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


HEXAMETHYLENE DIISOCYANATE *97-1*

CAS: 822-06-0

RTECS: MO1740000

Fraction By Weight: <0.2%

ACGIH TLV: 0.005 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE IRRITATION TO
THE RESPIRATORY TRACT; NOSE, THROAT, LUNGS. EYES: IRRITATING, MAY
INJURE TISSUE IF NOT PROPERLY REMOVED. SKIN: SENSITIZER. ALLERGIC
REACTION MAY OCCUR IN SOME INDIV IDUALS. (SEE SUPPLEMENTAL DATA)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS.

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: MOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:24F
Lower Limits:1.1
Upper Limits:13.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS W/A
FULL FACEPIECE OPERATED IN PRESSURE-DEMAND WHEN FIGHTING FIRES. USE
WATER FOG NOZZLES TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:DON'T USE WATER. FLAMMABLE LIQUID CAN
RELEASE VAPORS THAT FORM MIXTURES AT TEMP AT/ABOVE FLASHPOINT.
ELIMINATE/ISOLATE IGNITION SOURCES. MAY PRODUCE TOXIC GASES

Accidental Release

Spill Release Procedures:WEAR RESPIRATOR, ABSORB W/VERMICULITE/OTHER
ABSORBENT MATERIAL. ELIMINATE ALL IGNITION SOURCES. STOP LEAK AT
SOURCE & PREVENT SPREADING.

Handling

Handling and Storage Precautions:STORE IN DRY AREA. KEEP CONTAINERS
CLOSED. PROTECT FROM PHYSICAL DAMAGE. EMPTIED CONTAINERS RETAIN
PRODUCT RESIDUES. STORE <120F. FOR INDUSTRIAL USE.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS DESIGNED TO
COMPLY W/OSHA 1910.106. KEEP CLOSURE TIGHT & CONTAINER UPRIGHT.
DON'T STORE NEAR HEAT/SPARKS/FLAME. DON'T GET IN EYES. KEEP AWAY
FROM CHILDREN. AVOID SK IN CONTACT. DON'T TAKE INTERNALLY.

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED, A NIOSH/MSHA JOINTLY
APPROVED AIR SUPPLY RESPIRATOR IS ADVISED IN ABSENCE OF PROPER
ENVIRONMENTAL CONTROL.
Ventilation:SUFFICIENT MECHANICAL (GENERAL/LOCAL EXHAUST) VENTILATION
TO MAINTAIN EXPOSURE BELOW TLVS.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:CHEMICAL SPLASH GOGGLES/SAFETY GLASSES
Other Protective Equipment:SOLVENT IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH W/SOAP & WATER AFTER USE, BEFORE EATING/SMOKING.
Supplemental Safety and Health
HEXAMETHYLENE DIISOCYANATE MONOMER CONTENT LESS THAN 0.2% BASED ON
RESIN SOLIDS AT TIME OF MANUFACTURE. AFTER 3-6 MONTHS STORAGE, THE
FREE MONOMER CONTENT MAY RISE TO A MAXIMUM OF 0.5%.

Chemical Properties

Boiling Pt:B.P. Text:167-302F
Vapor Density:>1
Spec Gravity:1
VOC Grams/Liter:4.91
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:<0.1
Appearance and Odor:CLEAR LIQUID W/SOLVENT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
ALKALI METAL HYDROXIDES, SODIUM HYDROXIDE & STRONG OXIDIZERS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, FLAME, TEMPS
AT/ABOVE 21F & OTHER IGNITION SOURCES
Hazardous Decomposition Products:BY FIRE: CO2, CO, OXIDES OF NITROGEN,
TRACES OF HYDROGEN CYANIDE & HEXAMETHYLENE DIISOCYANIDE

Disposal

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBENT MAY BE DEPOSITED IN A LANDFILL IAW/LOCAL, STATE & FEDERAL
REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.